Attractive looking push-in profile for stair step edges for use with laminate and parquet floors for flooring heights 8/9mm or 14/15mm.The stair edging provides safe,neat edges on steps and stairs,and covers part of the riser to eliminate the sightline of the join on the step. Secured by screws ,this step edging profile for laminate, parquet & wood flooring should be fixed in place first,(direct onto floorboards or concrete),before the laminate or parquet flooring.The stair nose comes in Aluminium Anodised Silver or Gold,and framed decorative wood finishes Oak,Walnut,Rustic Oak,Antique Oak,Beech,Maple etc. (Installation tip: Start from the bottom ,and lay the riser.With the lip of the nosing against the riser, screw down base plate of nosing.Cut covering of tread so that it fits in between rear edge of nosing & the second riser.Push in tread board into groove.Then move on to second step riser.).
- Material: - Aluminium anodised silver or gold & also Wood finish Antique Oak, Beech, Rustic Oak, Maple,Walnut
- Flooring Heights: 8/9mm, or 14/15mm
- Drop(Lip): 8mm & 10mm respectively
- Length: 2.7m(9ft)